Audix Microphones R61 True Diversity Receiver, B60 Bodypack with ADX10FL Condenser Microphone and Mount

Herman # AUDAP61FLUTE
MFR # AP61 FLUTE

$699.00

Audix Microphones Audix Microphones

Wireless System, Microphone
R61 True Diversity Receiver, B60 Bodypack with ADX10FL Condenser Microphone and Mount
 
A professional true diversity wireless system featuring the ADX10FL miniaturized cardioid condenser for standard-sized flutes.
 
The ADX10FL reproduces the natural tone and percussive nature of the flute with detail and accuracy. The tight pickup pattern of the mic helps to isolate the flute from the rest of the instruments on stage. Specifically designed for use with a standard-sized flute, the ADX10FL includes an integrated clip that attaches to the headstock of the flute.
 
A single space rackmount kit with BNC cables for front mounting antennas is included. Optional accessories include rackmount kit for mounting two systems in one rack space, active directional antennas and antenna distribution system for up to four systems (4 channels).
 
Frequency Range
522 MHz - 586 MHz
 
Features
R61 True Diversity Receiver
  • 64 MHz Wide spectrum tuning receiver
  • 207 Pre-coordinated frequencies for quick, easy and reliable set up
  • One-touch auto scan searches for clear channel
  • One-touch sync links transmitter to receiver via infrared beam
  • 2560 tunable frequencies
B60 ADX10FL Bodypack Transmitter
  • 64 MHz Wide spectrum transmitter with ADX10FL condenser microphone and mount
  • Durable metal housing
  • 14 Hour run time - AA batteries
What's In The Box
  • 1 x R61 64 MHz True Diversity Receiver
  • 1 x B60 Bodypack Transmitter
  • 1 x ADX10FL Condenser Microphone and Mount
  • 2 x Antennas
  • 1 x Audio Cable
  • 2 x AA Batteries
  • 1 x Carrying Case
  • 1 x Power Supply
  • 1 x User Guide
  • 1 x Rackmount Hardware 
  • 2 x BNC Cables
R61 Specs:
Frequency Range: 522 MHz – 586 MHz
Bandwidth: 64 MHz
Compatible Systems: 20 Compatible system operation
Switchable Frequencies: 207 Preset frequencies
Manual Mode: 2560 Frequencies (spaced 25 kHz apart)
Frequency Response: 45 Hz – 18 kHz
Compander System: 2:1
Pilot Tone: 32 kHz
Receiving System: Single tuner, true diversity
Signal-to-Noise Ratio: 112 dB at 30 kHz deviation (A-weighted)
Total Harmonic Distortion: ≤.4% (33 kHz deviation at 1 kHz)
Sensitivity: 5 dBμV (S/N 60 dB at 25 kHz deviation, A-weighted); Balanced: -12 dBv @ 25 kHz deviation, 600 ohm load 
Audio Output (AF=0): 1/4": -18 dBv @ 25 kHz deviation, 10 kohm load
Output Connectors: 1/4", XLR
Audio Level Adjust: Balanced: -12 to +9 dBu Line: -24 to +4 dBu (adjustable in 6 dB-steps)
Range: 450', (137 M)
Power Supply: 100 - 240V / 50 - 60 Hz, 12V DC, 1A
Dimensions: 205 mm (W) x 206 mm (D) x 44 mm (H)
Net Weight: 2.43 lbs. / 1.1 kg
B60 Specs:
RF Power Output: 10 mW, 40 mW
Frequency Bandwidth: 64 MHz
Gain Controls: 0 dB, -6 dB, -12 dB
Input Connector: 3 pin mini-XLR
Batteries Included: 2 AA 1.5 V
Current Consumption: 110 mA typical
Battery Life: 14 hours
Input Impedance: Mic: 10 kohm, Line: 1 Mohm
Max Sound Pressure Level: 128 dB to140 dB (depending on mic)
Dimensions: 67 mm (W) x 90 mm (L) x 17 mm (D); 2.6" (W) x 3.5" (L) x .67" (D)
Net Weight: 3.0 oz / 85 g (without battery)
ADX10FL Specs:
Transducer Type: Pre-Polarized Condenser
Frequency Response: 50 Hz - 18 kHz
Polar Pattern: Cardioid
Output Impedance: 250 ohms
Sensitivity: 4.5 mV / Pa @ 1k
Equivalent Noise Level: <29 dB (A-weighted)
Signal to Noise Ratio: >65 dB
Maximum SPL: ≥120 dB
Power Requirements: 5-52 V phantom
Connector: Shielded 3’ terminating to a minature 3 pin XLRf
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Materials / Finish: Machined Brass Capsule / Black Finish
Weight: 110 g / 4 oz
Length: 25 mm / 0.98 in
Part NumberFrequency RangePriceQty.

AUDAP61FLUTE

522-586 MHz$699.00

This item has been added to your cart.

Currently, there are not any Learning Center items related to this specific product. Search for articles on other products.