- Rack/Tower convertible
- Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
- Multiple mounting methods
- Allows for standardization on one product for use in different environments.
- Front-access servicing
- Simplifies installation and UPS maintenance while minimizing space requirements.
Smart-UPS Features & Benefits
- Boost and Trim Automatic Voltage Regulation (AVR)
- Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
- Intelligent battery management
- Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Power conditioning
- Protects connected loads from surges, spikes, lightning, and other power disturbances.
- Temperature-compensated battery charging
- Prolongs battery life by regulating the charge voltage according to battery temperature.
- Automatic restart of loads after UPS shutdown
- Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test
- Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Disconnected battery notification
- Warns when a battery is not available to provide backup power.
- Network manageable
- Provides remote power management of the UPS over the network.
- Audible alarms
- Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
- LED status indicators
- Quickly understand unit and power status with visual indicators.
- Serial Connectivity
- Provides management of the UPS via a serial port.
- USB connectivity
- Provides management of the UPS via a USB port (not available on all models).
- Disconnected battery notification
- Warns when a battery is not available to provide backup power.
- User-replaceable batteries
- Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Hot-swappable batteries
- Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Predictive failure notification
- Provides early-warning fault analysis ensuring proactive component replacement.
- Resettable circuit breakers
- Enables a quick recovery from overload events.
- Battery failure notification
- Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Adjustable voltage-transfer points
- Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
- Adjustable voltage sensitivity
- Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
- Safety-agency approved
- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Output Power Capacity: 280 Watts / 450 VA
Max Configurable Power: 280 Watts / 450 VA
Nominal Output Voltage: 120V
Output Voltage Distortion: Less than 5% at full load
Output Frequency (sync to mains): 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
Topology: Line Interactive
Waveform Type: Stepped approximation to a sinewave
Output Connections:
(4) NEMA 5-15R | |
Nominal Input Voltage: 120V
Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections:
NEMA 5-15P | |
Input voltage range for main operations: 82 - 144V
Input voltage adjustable range for mains operation: 75 - 154V
Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 5 hour(s)
Replacement Battery: RBC18
Communications & Management
Interface Port(s): DB-9 RS-232
Control panel: LED status display with On Line : On Battery : Replace Battery and Overload indicators
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO): Optional
Surge Protection and Filtering
Surge energy rating: 400 Joules
Filtering: Full time multi-pole noise filtering : 0.7% IEEE surge let-through : zero clamping response time : meets UL 1449
Data Line Protection: RJ-11 Modem/Fax protection (four wire dual line), RJ45 10/100 Base-T Ethernet protection
Shipping Weight: 12.32 KG
Shipping Height: 164.00 mm
Shipping Width: 476.00 mm
Shipping Depth: 589.00 mm
Operating Environment: 0 - 40 °C
Operating Relative Humidity: 0 - 95%
Operating Elevation: 0-3000 meters
Storage Temperature: -15 - 45 °C
Storage Relative Humidity: 0 - 95%
Storage Elevation: 0-15000 meters
Audible noise at 1 meter from surface of unit: 38.00 dBA
Online Thermal Dissipation: 38.00 BTU/hr
Regulatory Approvals: CSA, FCC Part 15 Class A, UL 1778
Standard Warranty: 2 years repair or replace
Currently, there are not any Learning Center items related to this specific product. Search for articles on other products.