These small IR receivers have been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers, etc. – anywhere an inconspicuous appearance is desired. The high sensitivity of these receivers allows placement behind speaker grilles and still receive IR commands up to 80 feet away.
Features
- Wire channel for clean installation.
- System testing red-talk-back LED.
- Includes 789-44 connecting block, power supply, and four 283D emitters for easy system installation.
- Surface-mount design
- Extended Range (up to 120 feet)
- For use with all types of cable boxes, satellite boxes, remote controls and TVs
- Works with LED, LCD & plasma TVs, and CFL lighting
- White, silver & black trim kit included to match any AV system
- Works with all types of cable boxes, satellite boxes, and TVs
- Low profile—easy to hide
- Proprietary ambient noise-suppression technology for reliable operation in any lighting environment including compact fluorescents
- IR modulation frequency bandwidth: 25-60kHz
- Reception range: up to 120 ft/36 m*
- Color-coded connectors for fast, easy installation
* Actual range depends on remote control output and ambient lighting conditions
Kit includes
- (1) DL95 IR receiver
- (1) Model 789-44 connecting block
- Connects one IR receiver to 4 IR emitter ports
- Enough power to drive up to 4 dual emitters
- (1) 12VDC regulated power supply
- (4) Blink-IR™ Designer emitters
- (1) Instruction manual
- (1) Trim kit to match white, silver and black AV components
- Infrared carrier frequency bandwidth: 25 - 60 kHz.
- Reception range: Up to 80 feet.*
- Reception angle: +/- 60 degrees.
- Cable requirements: See “INSTALLATION” below.
- Max. Transmission length: 1 mile using 18 gauge wire.
- Maximum current output: 100mA.
- Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
- Dimensions: 2.55” x 0.55” x 0.35” (65mm x 14mm x 9mm).
- Power requirements: +12VDC, 10mA.
* Depending on remote control output strength and ambient conditions.
MOUNTING
The IR receiver can be mounted to any flat surface, using the two-sided adhesive tape supplied.
An additional feature is a wire channel on the rear of the surface mount IR receiver. This will give the installer the ability to provide clean wire dressing in any direction.
Currently, there are not any Learning Center items related to this specific product. Search for articles on other products.
Share
Xantech
